Please note: These blueprints are quite old. They are provided for informatonal purposes only. Use at your own risk.

Specialised Beechcraft Tools

Guide Assembly
Part 181305: Guide Assembly - Aileron Tab Hinge Pin
Part 186118: Guide Assembly - Elevator Tab Hinge Pin
Part 186137: Clamp - Hinge Pin Guide Tube
Part 186263: Guide Tube - Rudder Tab Hinge Pin


Jacking
Part 84-180930: Socket Assembly - Jack
Part 184222: Nut Assembly - Airplane Hoist
Part TK 116 Right and Left: Jack Socket
Part TK 121 (Sheet 1 of 3): Front Fuselage Dolly, Complete Assembly
Part TK 121 (Sheet 2 of 3): Front Fuselage Dolly, Thrust Bearing
Part TK 121 (Sheet 3 of 3): Front Fuselage Dolly


Sling
Part 180914: Sling Assembly - Hoisting
Part TS 951: Sling, Enginehoist
Part 18087: Bolt - Lug for Hoisting Ship
Part 18091: Lug - For Hoisting Ship
Part 18092: Eye Bolt - For Hoisting Ship


Tow Bar
Part TK 106: Handling Fixture
Part TK 106A (Sheet 2 of 3): Handling Fixture
Part TK 106A (Sheet 3 of 3): Handling Fixture


Wrench
Part 404-180891: Wrench - Landing Gear Hinge Bolt
Part 404-188035: Wrench Assembly - Landing Gear Nut
Part 180131: Wrench Assembly - Landing Gear Overload Clutch
Part 188913: Nut - Adjustment Clutch Landing Gear Overload - Note: This blueprint is to be used with 180131. Blueprint 180131 calls for 180132, but that blueprint isnít available. Blueprints 188913 shows what the pins for the Landing Gear Wrench would be fitted into.
Part TS 588: Wrench - Elevator Jam Nut
Part TS 657: Wrench - Rudder Tab Drive
Part TS 658: Wrench - Rudder Tab Drive, Open End 1 in, Open End 7/8 in
Part TS 724: Wrench - Installing Cowl Fastener, Hook


Other
Part 694-180440: Cover Assembly - Pitot Tube
Part 694-184016: Lug - Leveling
Part 112135: Fitting
Part 182061: Puller - Wing Hinge Bolt
Part TK 111A: Dolly - Aircraft Engine
Part TK 111B: Dolly - Aircraft Engine
Part TK 889: Diaphragm Brake Bleeder
Part TS 101: Piloted Spiral Reamer
Part TS 558: Drill (Stow Snake Drill)
Part TS 661: Puller - Wing Hinge Bolt
Part TS 669: Pin - Wing Aligning, 15/16 x 3-3/8 in.
Part TS 691: Lord Bushing Puller
Part I189666: Plug Assembly - De-icer Testing
Part 734-183809: Card - Compass Correction